Filter

Showing the single result

Frequently Asked Questions

 

Are Cobra alarms Thatcham approved?

Cobra immobilisers and vehicle alarms are certified by Thatcham and are accepted by all major insurance companies in the United Kingdom.

 

How do I use the Cobra touch key?

Firstly, use a functional touch key to deactivate the immobiliser. Then, set the immobiliser switch '1' to ON. The LED will light up as a result of this. Following that, the LED will glow for around 1 second after you insert a fresh key into the mini-socket.

 

How do I reprogram my Cobra alarm remote?

Cobra alarm systems come with a deactivation card as well as a four-digit programming code that can only be used to programme and reconfigure the device. The process for reprogramming is simple and takes only a few minutes. Firstly, enter your vehicle and get all of your alarm key fobs ready for reprogramming. For around 10 seconds, hold down both buttons on each remote until the LEDs stop flashing. Within five seconds, switch the ignition three times between the “On” and “Off” settings. The Cobra alarm system's security LED will flash once to signify that programming mode has been activated. Count the number of flashes on the LED after turning the ignition key to the “On” position. When the number of flashes matches the first digit of your four-digit programming code, turn the ignition key to the “Off” position. Repeat this step for the remaining three digits. If the code was input correctly, the alarm LED will then illuminate upon ignition.